The Agilent 1260 Infinity G1377A High Performance Micro Autosampler is designed to perform capillary LC with injection of sample volumes ranging from nL to μL. A micro Rheodyne valve and the optimized design of the needle seat, loop and seat capillaries minimize dispersion. A high-resolution metering device offers resolution ten times better than a standard autosampler, bypass operation facilitates low delay volume, increased sample injection speed for high sample throughput, flexible and convenient sample handling with different types of sample containers. Using 384-well plates allows to process up to 768 samples unattended.
S/N: DEACP00171
Specifications:
Type | Specifications |
---|---|
GLP features | Early maintenance feedback (EMF), electronic records of maintenance and errors |
Communications | Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output |
Safety features | Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display |
Injection range | 0.01– 8 μl in 0.01 μl increments with the small loop capillary 0.01– 40 μl in 0.01 μl increments with the extended loop capillary |
Precision | Typically < 0.5% RSD of peak areas from 5 – 40 μl, Typically < 1% RSD from 1 – 5 μl Typically < 3% RSD from 0.2 – 1 μl |
Pressure range | up to 400 bar (5880 psi) |
Sample viscosity range | 0.2 – 5 cp |
Sample capacity | 2 × well-plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in 2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials 54 Eppendorf tubes (0.5/1.5/2.0 mL) in 2 x 27 Eppendorf tube plate |
Injection cycle time | Typically < 30 s using following standard conditions: Default draw speed: 4 μl/min Default eject speed: 10 μl/min Injection volume: 0.1 μl |
Carry-over | Typically < 0.05% using the following conditions: Column: 150 x 0.5 mm Hypersil ODS, 3 μm Mobile phase: Water/Acetonitrile = 85/15 Column Flow rate: 13 μl/min Injection volume: 1 μl caffeine (=25 ng caffeine), 1 μl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port |
Dimensions | 200mm x354mm x440mm |