The UltiMate 3000 UHPLC Multiple Wavelength Detector is recommended for laboratories employing either conventional or RSLC in routine analyses and method development. A standard version (MWD-3000) with a data rate of up to 100Hz is also available for use with Thermo Scientific Dionex UltiMate 3000 Standard LC systems.
Features:
- Low noise (typically <±7 µAU) and drift (typically <0.5 mAU/h) offer the lowest LODs and LOQs.
- Data collection rates of up to 200Hz allow detection and characterization of extremely narrow peaks.
- Benefit from fast UV-vis data acquisition, even for 10 peaks separated in 10s+C1.
- A selection of stainless steel and Thermo Scientific™ PEEK™ flow cells provide maximum flexibility for standard and biocompatible applications.
- Front access to prealigned cells and lamps simplifies routine maintenance.
- ID chips track lamp and cell parameters for audit trails.
- Upgrade to full diode array functionality to accommodate your needs and your budget.
Specifications:
| Data Collection Rate | 200 Hz |
|---|---|
| Detection Mode | Single-Beam |
| Detector Type | Single-Beam |
| GLP Features | Automatic Instrument Qualification (AutoQ), System Wellness and Qualification Monitoring with Chromeleon Software, Lamp and Cell ID Chips. |
| Display | LCD Monitor |
| Drift | <1 mAU/hr |
| Noise | <±8 µAU |
| Cell Volume | 13 μL |
| Flow Cell Volume | 13 μL |
| Pixel Resolution | <1.0 nm |
| Slit Width | Variable |
| Wavelength Accuracy | ±1.0 nm |
| Wavelength Range | 190 to 800 nm |
| Lamp | Deuterium Lamp, Tungsten Lamp |
| Linearity | <3%RSD |
| PC Connection | USB |
| Response | 2 Sec. |
| Voltage | 85 to 260 V |
| Description | MWD-3000 RS Rapid Separation Multiple Wavelength Detector, without flow cell |
| Unit Size | Each |
