header

Pre-owned Equipment

Parts Depot

 

Agilent 6890N GC with CTC Combi PAL

 
Agilent 6890N GC with CTC Combi PAL
Agilent 6890N GC with CTC Combi PAL
  Agilent 6890N GC System Capabilities:

-Dual channel design supports two inlets and two detectors.
-Full range digital data output enables the smallest and largest peaks to be quantitated in a single run.
-Full EPC is available for all inlets and detectors. Control range and resolution are optimized for the specific inlet or detector module.
-EPC with capillary columns provides four column flow control modes: constant pressure, ramped pressure (3 ramps), constant flow, or ramped flow (3 ramps). Column average linear velocity is calculated.
-Atmospheric pressure and temperature compensation is standard, so results do not change, even when the laboratory environment does.
-Automatic Liquid Sampling is fully integrated into mainframe control.
-Set point and automation control can be done from the local keyboard or via a networked data system. Clock-time programming can be initiated from the front panel to initiate events (on/off, method start, etc) at a future date and time.
-A run time deviation log is created for each analysis to ensure that all method parameters were achieved and maintained.
-Display of all GC and automatic liquid sampler (ALS) set points at the GC or data system. Agilent supports open connectivity by providing communication protocols to other vendors.

The CTC PAL sample injectors enable GC and GC/MS laboratories to increase productivity with greater automated sample preparation capabilities and a variety of sample vial options. The high-end CombiPAL sample injector offers three types of sample injection techniques: liquid injection, headspace, and solid-phase microextraction (SPME). The lower-cost GC PAL platform can be configured for liquid injection only but offers many of the other capabilities of the CombiPAL including large volume injection (LVI), multiple vial sizes, and extended sample vial capacity.

Features:

-Top-mounted on GCs to save valuable bench space
-Interfaces with any Agilent 6890 GC
-Integrated software control available for GC ChemStation, MSD Productivity Chemstation, and EZ Chrom
-SPME (CombiPAL only)
-Heated syringe headspace (CombiPAL only)
-Large-volume injection up to 500 µL
-Accomodates 4 vial sizes: 1 mL, 2 mL, 10 mL, and 20 mL
-Accomodates deepwell microplates and standard microplates

Agilent 6890 Plus GC Capabilities:

-Dual channel design supports two inlets and two detectors.
-Full range digital data output enables the smallest and largest peaks to be quantitated in a single run.
-Full EPC is available for all inlets and detectors. Control range and resolution are optimized for the specific inlet or detector module.
-EPC with capillary columns provides four column flow control modes: constant pressure, ramped pressure (3 ramps), constant flow, or ramped flow (3 ramps). Column average linear velocity is calculated.
-Atmospheric pressure and temperature compensation is standard, so results do not change, even when the laboratory environment does.
-Automatic Liquid Sampling is fully integrated into mainframe control.
-Set point and automation control can be done from the local keyboard or via a networked data system. Clock-time programming can be initiated from the front panel to initiate events (on/off, method start, etc) at a future date and time.
-A run time deviation log is created for each analysis to ensure that all method parameters were achieved and maintained.
-Display of all GC and automatic liquid sampler (ALS) set points at the GC or data system.

The Agilent 6890 Plus GC is a state-of-the-art gas chromatograph that provides superior performance for all applications. The Agilent 6890 Plus GC key applications include the following:
   • Biodiesel
   • Chemical Analysis
   • Drug Screening
   • Environmental
   • Food Safety
   • Hydrocarbon Processing
   • Law Enforcement
   • Pesticide Determination
   • Research Laboratories
   • Toxicology

CTC Combi Pal features:
-Static Headspace, SPME and Liquid Injection combined in one single instrument
-Liquid injection volume up to 500µl for LVI applications
-Syringe only concept, no sample loops, transfer lines or valves
-Injects into 4 different Injectors without hardware modifications
        - Top mounted, saves bench
        - Uncompromising precision and sample capacity
        -Interfaces with any major GC and GC/MS system 


This refurbished Agilent 6890N GC with CTC Combi PAL is in great condition. It has been tested at SpectraLab Scientific.


A 90 day warranty is included.
 
We have special expertise on analytical equipment. We encourage you to contact us to speak with one of our expert and professional team members.
 
Thanks for looking and we look forward to hearing from you!

 
 
  Price: In Stock Call for Quote
  INQUIRE/OFFER
 
  Please Call Us at Toll Free Number:
1-866-777-3688 Tel: 905-946-8066
 
Contact by email at:
info@spectralabsci.com


 

The one stop shop for all your analytical laboratory needs! Your source for

PRE-OWEND Spectralab Scientific Incorporation CERTIFIED Equipment.

We buy your laboratory or surplus analytical equipment:

Contact buy@spectralabsci.com

Trade-in “service or analytical equipment”:

available via info@spectralabsci.com

*
  Feature Products:
   

Copyright 2014 SpectraLab Scientific Inc. All right reserved. Please contact us by email at: info@spectralabsci.com

Being supported and modified by Spectralab, contact by email at:info@spectralabsci.com