header

Pre-owned Equipment

Parts Depot

 

Waters Nano ACQUITY UPLC with ACQUITY 2996 PDA

 
Waters Nano ACQUITY UPLC with ACQUITY  2996 PDA
Waters Nano ACQUITY UPLC with ACQUITY  2996 PDA
Waters Nano ACQUITY UPLC with ACQUITY  2996 PDA
Waters Nano ACQUITY UPLC with ACQUITY  2996 PDA
Waters Nano ACQUITY UPLC with ACQUITY  2996 PDA
 

Maximum resolution– optimized system to drive 1.7 µm BEH particle technology to yield maximumpeak capacity for complex mixtures.

Maximumreproducibility – direct nanoflow control and a novel, moveable heating andtrapping module for <0.25-minute standard deviation run-to-run reproducibility,even overlong gradients

Maximum throughput– BEH Technology columns enable faster gradient separations for simplemixtures, or when preforming targeted analyses without compromising resolution

Robustness –Nano-scale columns and fittings (PEEK, 1/32 stain-less steel and goal coating)provide reliable operation for up to 10,000 psi, with novel pressure trapping

Ease-of-use –Direct gradient control enables minimized tubing assembles and simplifiedloading and trapping schemes.

Enhanced on-board diagnostics – Efficiently monitor system performance

Combine with any MS– Control the nano ACQUITY UPLC system from your Waters, Thermo Fisher Scientific,or ABI/MDS SCIEX mass spectrometer software platforms

UPLC and HPLC –Compatible with a wide range of conventional nano-scale columns with a flowrange from 200 nL/min to 100 µL/min 


Acquity 2996 PDA

Item

Specification

Wavelength range

190 to 800 nm

Light source

Prealigned, Deuterium lamp

Spectral Resolution/Optical Bandpass

1.2 nm per photodiode with a total of 512 photodiodes, digital and optical (3D-mode)

Digital Resolution  

1.2 nm – 600 nm (2D mode)

Wavelength accuracy

±1 nm

Linearity range

5% at 2.0 AU, propylparaben, at 256 nm

Spectral resolution

1.2 nm

Baseline noise

±1.5 × 10–5 AU peak-to-peak, dry, at 254 nm

Drift

1 × 10–3 AU/hour at 254 nm (after warm-up)

∆T 1°C per hour

Operation temperature

4 to 40 °C (39 to 104 °F), not to vary more

than 1 °C per hour (to prevent drift)

Relative humidity

20 to 80%, noncondensing

Power

Grounded ac, 100 to 240 Vac

Power requirements

100-230 VAC

Frequency range

50 to 60 Hz

Path Length

10 mm (standard analytical cell)

Cell volume

8 µl (standard analytical cell)

Pressure Limit

1000 psi (standard analytical cell)

Wetted materials

316 stainless steel, fused silica Tefzel

Dimensions

Width: 11.5 in. (29 cm)

Depth: 24 in. (61 cm)

Height: 8.5 in. (22 cm)

Weight

31.5 lbs (14.3 kg)




This Refurbished Waters Nano ACQUITY UPLC System with Waters ACQUITY  2996 PDA
PDA come with the followings:


- Waters Acquity 2996 PDA with Nano scale flow cell  installed
- Waters Nano ACQUITY Binary Solvent Mamager
- Waters Nano ACQUITY Auxiliary Solvent  Manager
- Waters Nano ACQUITY Sample Manager with attached column oven
- Waters Sample Tray
- PC with Suitable software and all essential cables required for full operation

We are professionals. We encourage you to contact us to speak with one of our expert and professional team. Thanks for looking and we look forward to hearing from you!
 
 
  Price: In Stock Call for Quote
  INQUIRE/OFFER
 
  Please Call Us at Toll Free Number:
1-866-777-3688 Tel: 905-946-8066
 
Contact by email at:
info@spectralabsci.com


 

The one stop shop for all your analytical laboratory needs! Your source for

PRE-OWEND Spectralab Scientific Incorporation CERTIFIED Equipment.

We buy your laboratory or surplus analytical equipment:

Contact buy@spectralabsci.com

Trade-in “service or analytical equipment”:

available via info@spectralabsci.com

*
  Feature Products:
   

Copyright 2014 SpectraLab Scientific Inc. All right reserved. Please contact us by email at: info@spectralabsci.com

Being supported and modified by Spectralab, contact by email at:info@spectralabsci.com