header

Pre-owned Equipment

Parts Depot

 

Waters Prep 2000 HPLC system with Waters 2487 UV/Vis Detector

 
Waters Prep 2000 HPLC system with Waters 2487 UV/Vis Detector
Waters Prep 2000 HPLC system with Waters 2487 UV/Vis Detector
  This Waters Prep 2000 HPLC System comes with Waters Prep LC Controller, Waters 2487 Dual Absorbance Detector, Waters Prep Pump. Its mobile flow rate up to 200mL/Min.

The following are included:
  • Manual injector assemply as photo
  • Suitable Software
  • All necessary cables/accessories required for full operation
Waters 2487 Dual Absorbance UV/Vis Detector
  Specification
Wavelength range 190 to 700 nm
Bandwidth <5 nm
Wavelength accuracy +1.0 nm
Wavelength repeatability +0.1 nm
Single λ dry noise <5 µAU
(at 230 nm, 1 –second digital filter, 30-second segments, 10-Hz data rate, analytical cell)
Wet noise <8 µAU
(at 230 nm, 1-second digital filter 30-second segments, 10-Hz data rate, analytical cell)
Dual channel noise (dry) <35 µAU
(measured at 230 nm, running at 230 to 280 nm with 2-second filter at 1-Hz data rate; dry, analytical cell)
Dual channel noise (wet) <45 µAU
(measured at 230 nm, running at 230 to 280 nm with 2-second filter at 1-Hz data rate; 1 ml/min, flow of acetonitrile, analytical cell)
Linearity <5% at 2.5 AU, propylparaben at 257 nm
Drift 1.0 x 10-4 AU/hr. max (∆T = +2°C/hr.)
Thermal drift 1.0 x 10-4 AU/°C max (∆T = +2°C/hr.)
Sensitivity setting range 0.0001 to 4.0000 AUFS
Filter setting range Single-wavelength: 0.1 to 5.0 seconds
Dual-wavelength: 1 to 50 seconds
Time-constant To 5.0-second Hamming filter
Digital data rates 1,2,5,10,20,40,80 Hz (single channel)
1,2 Hz (dual channel)
Analog output data rates (single λ mode) 10,20,40,80 Hz (channel A)
10 Hz only (channel B)
Lamp source 30-W High Brightness Deuterium lamp, 0.5 nm aperture, pre-aligned 2000 silicon photodiodes (matched pair)
Second-order filter Automatic for wavelengths > 370 nm
Wavelength calibration filter Erbium filter, used at startup or on demand
Flow cell TaperSlit flow cell design
Nitrogen purge Purge fitting present on optics bench
Path length 10 mm (standard analytical)
Cell volume 10 µL (standard analytical)
Pressure limit 6895 kPa (69 bar,1000 psi)
Materials 316 stainless steel, fused silica, Tygon
Operating temperature 4 to 40 °C (39 to 104 °F)
Operating humidity 20% to <95%, noncondensing
Shipping and storage -30 to +60 °C
Shipping and storage humidity

0% to <95% noncondensing


Please Note: the flow cell WILL BE installed before the system is shipped.

This refurbished Waters Prep 2000 HPLC System is in great condition. It has been tested at SpectraLab Scientific.

Can be sold separately upon request.

A 90 day warranty is included.

We are seasoned professionals in this area and we would be happy to have you speak with one of our experts here at SpectraLab.

Thanks for looking and we look forward to hearing from you!
 
 
  Price: Start From $13,500 USD
  INQUIRE/OFFER
 
  We will match prices with our competitors
  Please Call Us at Toll Free Number:
1-866-777-3688 Tel: 905-946-8066
 
Contact by email at:
info@spectralabsci.com


 

The one stop shop for all your analytical laboratory needs! Your source for

PRE-OWNED Spectralab Scientific Incorporation CERTIFIED Equipment.

We buy your laboratory or surplus analytical equipment:

Contact buy@spectralabsci.com

Trade-in “service or analytical equipment”:

available via info@spectralabsci.com

*
  Feature Products:
   

Copyright 2014 SpectraLab Scientific Inc. All right reserved. Please contact us by email at: info@spectralabsci.com

Being supported and modified by Spectralab, contact by email at:info@spectralabsci.com