|
Perkin Elmer 200 Autosampler
The autosampler injects at rates of up to two to three injections per minute, supplying high throughput and high speed. Users can achieve maximum precision from microbore to semi-prep injections using fixed or variable-fill modes. The autosampler also comes standard with precolumn dilution and derivatization.
The Perkin Elmer 200 UV/VIS Detector is a high-performance UV detector. The PerkinElmer Series 200 UV/Vis detector incorporates the most proven, time-tested dual-beam optical design in the industry - delivering outstanding sensitivity and remarkable stability.
The Perkin Elmer 200 Quaternary Pump features a flow rate of 0.01 to 10.0 mL/min and stores up to 20 methods. It offers superior flow rate precision (typically <0.1%), compositional accuracy (typically +/- 0.50%), and retention-time precision (typically <0.1%) for either isocratic or gradient separations.
pecification:
Injection range: Programmable from 0.1-1.0 µL at 0.1 µL increments, 1 µL to 2.5 mL at 1 µL increments
Replicate injections: 1 - 99 from one vial
Precision: Typically < 0.5% RSD of peak areas from 3 µL
Linearity: >0.999
Minimum sample volume: 1 µL in 7 µL
Sample syringe sizes: 50, 100, 250, 1000, 2500 µL
Carryover: <0.002 %
Flush cycles: User selectable, 1-9
Flush volume: 0 - 2500 µL
Sample capacity: 100 vial tray
Method parameters: Injection volume, sample draw speed, flush volume, flush cycle, 2 external contacts, start and stop time
Methods: Battery-backed storage of up to 20 methods including time programming. Editing of stored methods possible during runs
Injection cycle time: 2-3 samples per minute
Display: 7-line by 40-character backlit liquid crystal display
It is in a working condition and tested at SpectraLab
|
HPLC PRODUCTS
